Specialty Archery has five sizes of Apertures which will screw directly into Specialty Archery Pro Series and Ultra Lite Peeps with use of the Dual Aperture Wrench sold separately (#210078).

Increase your apparent magnification by reducing your hole size. We recommend selecting an aperture size that will fit tightly around the scope housing when looking through the peep at the scope while at full draw.

If you are using too large of an aperture, accuracy may suffer due to improper alignment of the scope and peep. If you are using too small an aperture, you may lose some field of view of the scope lens. Using a small aperture will also restrict the amount of light, making for a dim sight picture.

Aperture sizes are 1/8″, 3/32″, 1/16″, 3/64″, and 1/32″.

NOTE:

• The peep should be situated in the string so the side with the verifier, clarifier, or aperture is on the side you look through.
• You will need the Dual Aperture Wrench sold separately (#210078) to insert into peep.
• You will need an optional Peep Reducer (#753-3) for the Apertures to fit into the Large #749-37L and #749-37LH peeps.
• Not compatible with Podium Peep™, PXS Peep, or PXL Hunter Peep.